Products

Double Serpentine Water Heater (KBD)
Double serpantine KBD series of water heaters that take its thermal energy from two different heat sources (hot water boiler, steam boiler, solar panels, heat pumps, geothermal energy, etc.) provide domestic hot water supply by serpantine. Heat loss is reduced to a minimum thanks to the excellent thermal insulation. Widely used in hot water installations.
Combi Water Heater (KCB)
Kombi boylerler güneş enerjisinden faydalanarak hijyenik sıcak su teminini sağlar. Ana gövde bir nevi ısı kaynağı olarak özellikle pelet yakma sistemi kazanlar (katı yakıtlı) yada güneş enerjisi sistemleri gibi duruş kalkışın fazla olduğu yerlerde ek enerji deposu olarak görev yapmaktadır. Yerden ısıtma sistemleri gibi düşük sıcaklıkla çalışan sistemler için ideal bir çözümdür.
Single Serpantine Water Heater (KBS)
Single serpantine KBS series of water heaters that take thermal energy from a single heat source (hot water boiler, steam boiler, solar panels, heat pumps, geothermal energy, etc.) provide both economic and hygienic domestic hot water supply. All surfaces that come in contact with the user hot water are enamel coated.

Galvanized Water Storage Tank (G)
G series of galvanized accumulations tanks used for storing the conditioned water in heating and cooling systems. Usually, a heat exchanger (plate heat exchanger, tubular heat exchangers, boilers, chillers, fan coil, etc.) is mounted behind. All products used in soft foam polyurethane insulation. Additional electric heater can also be installed. Furthermore, with copper tube addition to galvanized accumulation tanks, a single or double serpantine copper coil tube galvanized boilers can also be manufactured.
Water Storage Tank (KA)
Accumulations tanks are used for storing the conditioned water hygienically in heating and cooling systems. Usually, a heat exchanger (plate heat exchanger, tubular heat exchangers, boilers, chillers, fan coil, etc.) is mounted behind. CFC-free polyurethane insulation material is used in all products which has a low heat loss.
Electrical Water Heater (KEB)
KEB series electric hot water heaters (electrical boilers), are used for heating hot water smoothly and hygienically in places where there is difficulty to supply heated water or to meet the consumer needs which prefers electric energy to heat water. In the electric hot water heaters, stainless steel tubular electric heaters are used according to needs and demands.

Closed Loop Water Heater (KSC)
KSC series of horizontal walled-tanks used as closed loop solar tanks and these tanks are compatible with all type of panels. By using optional resistance, the solar tanks can also be used as water heaters. Because of solar tank remains under the network pressure, there is no need a pump for operating the system. Thus, connection is made directly to solar panel and hot water installation.
Open Loop Water Heater (KSO)
KSO series of horizontal tanks without walled used as open loop solar tanks. Because of solar tank remains under the network pressure, there is no need a pump for operating the system. Thus, connection is made directly to solar panel and hot water installation. Open system is not recommended for frosty winter regions.
Horizontal Serpantine Water Heater (KSS)
KSS series of horizontal type coiled tanks for solar power are compatible with all types of panel. The risks seen through wall pressure in walled-systems are eliminated because of the serpantine in water heater. Thus, it has become more long lasting. With its special coil design, more uniform heat distribution within the tank is provided. Additional electric heater can be installed.

Air Separator (KHA)
KHA series of air separators remove air bubbles in water from hot water systems and cooling systems by collecting them on to surface of specially designed separator and by discharging them to outside of the system with air plug. Air bubbles in installments can result causing oxygen corrosion in heating and cooling systems, cavitation in pumps and system element, preventing heat transfer by sticking on heat transfer surfaces, Vibration and disturbing noises in the system. Using in steel, cast iron and cascade boiler systems is recommended.

Strainer (KTT)
KTT-series dirt separators allow sediments, muds and dirt, which occurs from hot water systems and cooling systems appliances and also with water qualities, separating from the installment to release from the drainage. The foreign substances found on installment lead elements to abrasion, make heat transfer more difficult on heat transfer surfaces, and lead to decreased productivity.

Air Separator Set (PHA)
PHA-series air and dirt separator sets designed to eliminate problems caused by air bubbles and also sediments, mud and dirt that found in the system with performing the dual function on a single device. Custom-designed air relief valve and air evacuation valve can be found on Kodsan brand air separator set.
Balance Tank Set (PDK)
PDK-series balance tank set is used for hydraulic balance tank, air separator and dirt separator functions in one device. Specially designed separator that found onto device is made of AISI 304 stainless metal filling material. Using in hydraulic imbalanced cast iron and cascade (multi-boiler systems) systems is recommended.

Balance Tank (DT)
DT series of hydraulic balance tanks provide thermal and hydraulic balance between heating source and installment and also extend the life of the boiler. Besides, they provide balance in pressure, temperature and flow in different types of heat boilers.